WL-MD-A wireless PIR motion detector is a new product based on ZigBee/SmartRoom HA standard design. In normal condition, human body infrared ray can be detected in real time if someone illegally breaks in within the range of 6 meters from the detector, then detector can send out wireless alarm signal to the host to realize detection task.
WL-MD-A wireless PIR Motion Detector applies wireless communication technology and doesn’t need any wiring. Moreover, it has powerful hidden ability and is not easy to be damaged when used in monitoring sites.
Main Features
High sensitivity and superior SNR
High stability for temperature changes
Powerful anti-interference ability, for instance, the interference from vibration or RF
Low power consumption and good hidden ability
Superior cost performance
Technical Parameter
Working Power: three 1.5 V AA batteries or 12 V DC
Detection Type: Motion Detection
Communication Mode: IEEE802.15.4(ZigBee/SmartRoom)
Bandwidth: 2.4-2.4835GHz
Detection Mode: Passive Infrared
Detection Coverage: Radius 6 m, 120 Degree Angle
Installation Height: 2.5 meters
Standby Current: 0.8 uA
Emission Current: 30 MA
Initial Time: 30 ~ 60 seconds
Communication Range: 50m
Working Temperature: -10 ~ 50℃
Working Humidity: Max. 95% RH
Product Dimension: 80mm×60mm×34mm
WL-MD-A wireless PIR Motion Detector applies wireless communication technology and doesn’t need any wiring. Moreover, it has powerful hidden ability and is not easy to be damaged when used in monitoring sites.
Main Features
High sensitivity and superior SNR
High stability for temperature changes
Powerful anti-interference ability, for instance, the interference from vibration or RF
Low power consumption and good hidden ability
Superior cost performance
Technical Parameter
Working Power: three 1.5 V AA batteries or 12 V DC
Detection Type: Motion Detection
Communication Mode: IEEE802.15.4(ZigBee/SmartRoom)
Bandwidth: 2.4-2.4835GHz
Detection Mode: Passive Infrared
Detection Coverage: Radius 6 m, 120 Degree Angle
Installation Height: 2.5 meters
Standby Current: 0.8 uA
Emission Current: 30 MA
Initial Time: 30 ~ 60 seconds
Communication Range: 50m
Working Temperature: -10 ~ 50℃
Working Humidity: Max. 95% RH
Product Dimension: 80mm×60mm×34mm
发表评论